Signode BXT3-19 Battery Powered Poly Strapping Tool – 5/8 – 3/4 Strapping

The Signode BXT3-19 is a proven battery-powered poly strapping combination tool. This powerful tool works with polyester and polypropylene straps of width 5/8” to 3/4”. It is lightweight at just 9.3 lbs and has an ergonomic design that minimizes operator fatigue. The tool applies a friction weld seal and its automatic weld function helps in speeding up the cycle time.

Applications of Signode BXT3-19

This battery bander finds widespread applications in a variety of industries including the following:

• Airlines & aerospace
• Manufacturing
• Automotive
• Food & beverages
• Apparel
• Publishing
• Lumber

It has also become a proven performer in the chemicals, printing, distribution, and brick/block industries. Automation applies the pre-set tension on the strapping and the tool applies the friction weld and cuts the strap. After welding, the tool’s unique system counts down to zero to allow the weld to cool down. A beep alerts the operator that the tool is ready to be removed.

Key Features

The key features of the Signode BXT3-19 are as follows:

• It features an automatic weld function that helps in speeding up cycle time
• Use the automatic mode for single-button operation for both pulling tension and sealing
• The tool runs in fully-automatic, semi-automatic, and manual modes
• The latest brushless motor helps minimize wear and maintenance, and increases the tool’s lifecycle
• The lightweight tool has an ergonomic design, which helps in reducing operator fatigue
• The tensioning force can be adjusted according to applications
• The latest battery is designed to reduce contact damage
• The BXT3-19 can be used with both Polyester and Polypropylene strapping

Due to modern technology several innovations are made and new tools are developed often for the packaging industry. The battery operated tools for packaging are so innovative and specifically target the packaging industry. Battery operated tools are making headway in most industries as they are faster and more productive. One company doing that is Orgapack with their OR-T250 tool, a plastic strapping tool that is becoming popular in the industry.

The OR-T250 is a user friendly tool and can be operated manually, semi-automatically or automatically. It can also be operated in a soft corner mode especially for fragile loads. Orgapack has made a lot of improvements on its tools and a lot flaws that were found previously in these tools have been fixed. The tools are now durable and reliable and do not break down.

The OR-T250 uses a 14.4 V Lithium ion battery that can complete up to 400 applications per charge. It has an adjustable tension force of 560 pounds along with an adjustable strap width option. The tool also uses the friction weld seal and does so upon the touch of a button. The OR-T250 comes with two batteries and a charger.

This tool has become popular due to the soft mode option that makes it easier and safer to strap small and fragile packages. Doing away with metal seals also has been cost effective for the industries. As this tool uses the friction weld sealing, the expensive metal seals are no longer used and this has been a cost effective measure as the industry need not stock on metal seals. This sealless tool has the same joint efficiency as found in other seal types.

Specifications

• Tool weight (including battery): 8.5 pounds (3.9 kg)
• Tensioning force: Fully adjustable up to 560 pounds
• Tensioning speed: 8.6 inches/second
• Battery Charging Time: Approx. min. 15-30 minutes

Another advantage of this tool is that during transit there is risk of rusting metal seals. The friction weld seals can withstand harsh or damp weather conditions, so there is no fear of it getting damaged during transit. The OR-T250 only take 3 seconds to complete the sealing process. This saves a lot of time for the operator in the workroom making it a good investment.

The OR-T 250 tool comes in two models. The 250 model suits poly strapping size 1/2″ – 5/8″ poly strap. Another model, the Orgapack OR-T 400 is the larger version of the 250 and suits sizes 5/8″ – 3/4″poly strapping. This tool is considered easier to use than all other banding tools.

Due to modern technology several innovations are made and new tools are developed often for the packaging industry. The battery operated tools for packaging are so innovative and specifically target the packaging industry. Battery operated tools are making headway in most industries as they are faster and more productive. One company doing that is Orgapack with their OR-T250 tool, a plastic strapping tool that is becoming popular in the industry.

The OR-T250 is a user friendly tool and can be operated manually, semi-automatically or automatically. It can also be operated in a soft corner mode especially for fragile loads. Orgapack has made a lot of improvements on its tools and a lot flaws that were found previously in these tools have been fixed. The tools are now durable and reliable and do not break down.

The OR-T250 uses a 14.4 V Lithium ion battery that can complete up to 400 applications per charge. It has an adjustable tension force of 560 pounds along with an adjustable strap width option. The tool also uses the friction weld seal and does so upon the touch of a button. The OR-T250 comes with two batteries and a charger.

This tool has become popular due to the soft mode option that makes it easier and safer to strap small and fragile packages. Doing away with metal seals also has been cost effective for the industries. As this tool uses the friction weld sealing, the expensive metal seals are no longer used and this has been a cost effective measure as the industry need not stock on metal seals. This sealless tool has the same joint efficiency as found in other seal types.

Another advantage of this tool is that during transit there is risk of rusting metal seals. The friction weld seals can withstand harsh or damp weather conditions, so there is no fear of it getting damaged during transit. The OR-T250 only take 3 seconds to complete the sealing process. This saves a lot of time for the operator in the workroom making it a good investment.

The OR-T 250 tool comes in two models. The 250 model suits poly strapping size 1/2″ – 5/8″ poly strap. Another model, the Orgapack OR-T 400 is the larger version of the 250 and suits sizes 5/8″ – 3/4″poly strapping. This tool is considered easier to use than all other banding tools.

Industries that manufacture and export their products everywhere have to be careful in their packaging strategy, as to how best to package a product and send to their customers without any damage in the process. For excellent strapping tools and other packaging equipment, industries have come to rely on manufacturers like Signode, who deliver quality products at competitive prices.

As Signode has been in the business for several decades, there are many loyal customers who trust both the company and its products. Signode designs ergonomic tools that are compact and easy to operate. They produce tools that are manual, pneumatic and battery operated. One such tool is the RCNS2-114 that is a single reverse notch pneumatic sealer. This tool from Signode is very durable and long lasting and this is very cost effective to the industries that use them.

The packaging industry commonly uses a tensioner, sealer and cutter while packing their products. Depending on the industry and their application requirement, the usage of these tools differ. While some industries are comfortable using combination tools that do all the tensioning, sealing and cutting in one go, there are industries that use separate tools for every operation. The RCNS2-114 is only a sealer and is commonly used along with the PN2-114 or the Fromm A452.

The RCNS2-114 is popularly known as the pistol grip sealer and it uses the reverse notch seal on joints of high tensile steel strapping. As this tool can be operated single handedly, this is a favorite with workmen in industries. It is also a safe tool to use as it has a casing made of metal alloys that keep it safe even during harsh strapping situations.

The RCNS2-114 is largely used to install street signs, construction of drilling platforms in chemical plants and water treatment facilities. This is a high tech tool that reduces intensive labor in strapping steel. As the strapping is applied in a quick and efficient manner operator fatigue is reduced and it saves a lot of time. Fromm’s A461 is the next best alternative for the RCNS2-114.

Since a sealer only applies the metal seal at the joint, a separate tensioner must be used to pull the strap tight before applying the seal. Fromm’s A452 and Signode’s PN2-114 are quality tensioner tools that can be used along with this sealer. Both are great tools and can be used according to one’s brand preference.

The RCNS2-114 uses the 1.25 inch snap seal and push seal and weighs 6 pounds. However, if you want faster output, then battery operated is the way to go.

The process of banding depends a lot on accurate application of tension power. In recent years, there has been growing demand for pneumatic tensioners simply because these are much more efficient than their manual counterparts. FROMM has taken a pioneering role in this regard by coming up with advanced and convenient versions of pneumatic tensioners.

FROMM A452 is one of the latest inventions in the tensioner category which is characterized by high strap tension force of 1910 lbs (8500 N). Steel processing or non-ferrous metal industries that often need to band heavy loads of beams, pipes, bars, steel coils or other uneven shaped objects have found this tensioner quite a useful one.

Technical parameters of A452:

The tensioner supports both regular and high tensile strapping qualities of up to 1100 N/mm². It suits strapping of width 19.0 – 32.0 and thickness of 0.63 – 1.27 mm. Then this is one tool which is very light, weighing around 9.6 lbs. A separate sealer is needed to complete the strapping process. Push or closed seal only matches this particular tensioner, which comes with an angled duck bill nose. Few features which should be highlighted are:

• Capability to pull very high strap tension of around 8500 N/ 1,900 lbs
• For suspension purpose, eye bolts are supplied with the tool.

Should you invest in the pneumatic tensioner A452:

Many have this question as to why go for a separate tensioner and sealer when so many high performance combination tools are available. One reason is that the tensioner and sealer package come at a cheaper rate than a combination tool with similar features. Then of course you can save further cost by opting for a manual sealer, if your requirements revolve around small or light duty applications. This way you get the same strapping quality but by investing lesser amount. Besides, this specific tensioner is armed with several unique features which would surely encourage you to put money into it:

• The freewheeling system ensures no strap tension is lost even when the tensioning cycle is over
• There is a black safety push button pressing which the strap tension can be released any time
• Amazingly high tension speed yet very silent operation

So, it can be deducted that by picking up the tensioner A452, the operator remains fatigue-free. For further details about this tool and FROMM strapping devices, get in touch with any reputed dealer of the company.

With steel strapping getting a lot of flak from customers and industry experts alike, poly strapping has launched itself in a big way. Poly strapping is currently the best strapping option that is equally strong, like steel strapping, and has more advantages too.

Though poly strapping has its own disadvantages, it has increased in popularity due to its cost effectiveness. Some customers feel that poly strapping has irrecoverable elongation due to constant stress and loses about 50% of tension within an hour. Experts also feel that if exposed to the elements there will be degradation of poly strapping.

Whatever the opinion may be, poly strapping seems to have arrived and will be here to stay. Since it is very cost effective, several industries are consciously making a switch to poly strapping from being steel strapping loyalists. Since steel strapping is not only expensive but also has the risk of injuring workmen, industries prefer poly strapping these days.

Advantages

• There are no sharp corners in poly strapping
• Using poly strapping with battery operated and pneumatic tools is very effective and 30-50% faster than steel
• Cost is at least 1/3^rd lesser than steel strapping
• No seal or buckle is necessary

Poly strapping comes in various widths and strengths. It is very ideal to be used in heavy duty applications and to replace steel banding. For instance, the 1.25”x.050” has a break strength of 3,800 pounds. This can be used in heavy duty applications effectively and is considered the strongest PET strap in the U.S.A This strap is ideal to replace the 1 ¼” steel strapping in most applications. The printed poly strap is also approved for railroads.

This strapping has a safety advantage as the risk of injuring workmen is very low. Also, this strapping will not leave a mark on the packages like its steel counterpart which can rust and a leave a stain on the package. Polyester strapping is used largely in lumber and metal industries that were earlier using steel strapping. As polyester does not have sharp edges and leave a scar on the objects, this has gained immense popularity in these industries.

Allstrap deals with all kinds of packaging goods, tools, dispensers, and poly and steel strapping of different widths and strengths. Call Allstrap for inquiries on strapping and strapping tools.

Another outstanding strapping device from Fromm is the P355 pneumatic strapping tool that is again one of the better heavy duty strapping tools in the market. This device is ideal for strapping bales of cotton, aluminum slabs, steel sheets, timber, aluminum coils, etc. Allstrap categorizes this device as the best pneumatically powered sealless strapping tool for larger packaging requirements. This tool uses higher quality plastic and poly straps that provide added benefits to packaging operations. These straps are more damage resistant, more shock absorbent and also create more tension in the packaging process. Compared to steel strapping, the plastic and poly straps are up to 50% more cost effective and also much safer to use.

The P355 is ideal for strapping in semi-automatic mode where the strap feeding is manual and even in stationary applications where the product is used automatically. The device has been built to be extremely hardy and robust, thus making it safe to use in a variety of industries without any safety hazards to and from this device. Ideally used in more heavy duty and stationary operations, this strapping tool is perfect for industries where larger and more durable products require a stronger strapping result.

Technical aspects of the P355:

• Tensioning force of up to 3500N depending on the strap quality
• Friction weld joint of up to 75% accuracy, again dependant on the strap quality
• Weld joint eliminates the need for seals and thus reduces cost of operation
• The tool weighs 5.8 kgs and is therefore more suited to stationary operations
• Can be operated with both polyester as well as plastic straps

The strap threading in this device is much more convenient as both straps are inserted together. Due to the adjustable strap sealing time, tension and tensioning speed, there is higher sealing efficiency, better strap tensioning and overall secure packaging results. This device is more versatile and suited to a number of operations because of its universal suspension bracket that is available as an accessory with Allstrap. Additionally the P355 also comes with a bottom base wearing protection plate that is used for products with a rough and hard surface.

Allsrap recommends the P355 created by Fromm for heavy duty packaging requirements that need to be carried out speedily and with more reliable and durable results that prevent any damage to packages during transport.

Battery powered strapping tools with friction weld joint technology are in demand these days because of their efficiency and reliability. Signode brings to you a wide selection of strapping devices with advanced features.

The Signode BXT2-16 is one of the latest offers from Signode which can serve the purpose of polyester strapping. Belonging to the Signode family, it is the first tool which runs in automatic mode. Since it utilizes friction weld joint technology to join strap ends, this ensures very high seal strength. The tool has replaced steel strapping because of its ability to accommodate high-strength Tenax strapping.

Important facts about BXT2-16:-

• It is used with 3/8″, 7/16″, 1/2″ and 5/8″ polyester and polypropylene strapping
• Tension rating varies between 200 to 550 lbs (890 to 2447 N) whereas for light tension it is between 88 to 335 lbs (391-1490 N)
• The machine weighs around 9.0 lbs.
• “Wear free” Brushless motor technique guarantees around 400 cycles per battery charge
• Available in seal feed or sealless Tension-Weld model

Advantages offered by BXT2-16

Users benefit immensely by shifting to battery powered strapping devices. The one benefit which deserves mention first is the strap welding system that uses friction sealing technique to enhance productivity, while reducing component wear. The BOSCH lithium- ion battery further adds up to the efficiency factor. The best thing about the battery is that it continues to provide full power until the last strapping cycle. Recharging can be done from anywhere. In fact full charging can be completed within 30 minutes. Then there is an active cooling system which takes care of the battery, ensuring that it never gets overheated. The tool’s robust design guarantees protection of the battery from any accidental damage. Since the tool supports simple two strapped loading that helps speed up cycle times. The electronic control ensures that the strap tension and weld strength can be easily adjusted. Be presetting up the level and time, you can ensure consistent performance and eliminate potential risk factors.

It can be concluded that Signode BXT2-16 is a versatile strapping tool best suited for polyester and polypropylene strapping of varied dimensions. If you put great emphasis on high quality tension force as well as safety and consistency then this tool will surely fulfill your criteria. Before finalizing the purchase of this tool or any other Signode device, consult a trusted dealer of the company.

The Swiss company, Fromm, is among the leading manufacturers of strapping tools in the world. The steel strapping product range produced by Fromm is incomparable due to the continuous research and development undertaken. Fromm produces a range of steel strapping products which are both manual and pneumatic depending on the work load and the application of the packaging. The manual tools produced by Fromm to be used in the steel strapping industry are ideal for smaller objects and are best used in operations on smaller surfaces. The pneumatic steel strapping tools, on the other hand, are better used for faster and more efficient results. These tools are ideal for larger workload, especially in an operational and shift setup.

In recent times, there has been debate about the choice between battery operated and pneumatic tools for the steel strapping industry. Like the A480 by Fromm, a popular pneumatic strapping tool for steel, pneumatic tools are rapidly gaining popularity in the strapping industry. The A480 and other pneumatic strapping tools produced by Fromm are preferred for the greater efficiency, longer life, greater productivity and the versatility of these tools. The one advantage that the battery operated tools seem to have over pneumatic tools like the A480 is that they are lighter and offer more convenience in mobility of operations. To offer a more objective perspective of the advantages and disadvantages of battery operated tools and pneumatic tools, they may be compared based on the following aspects:

Charging and Battery Life

Most strapping tool users are still under the impression left behind by the lifespan of the older nickel cadmium and metal hydride batteries. The real story with today’s technology is however different. The usage of lithium ion batteries have put battery operated tools at par with pneumatic tools like the A480.

Concerns with Size of the Tool

The common perception that the size of the tool defines the effectiveness of the tool and the power that it can generate are no longer true; especially not in certain industries. The choice here is wholly defined by the use and applicability of the tools. Battery operated tools to a large extent now compare with pneumatic tools. It is true though that beyond the power of half inch air impact; pneumatic tools are still the more viable option.

Irrespective of all the arguments for and against pneumatic tools like the A480, the final decision depends on the applicability, cost of purchase, and the functionality of the tool.

Golden Bear makes a brand new series of strapping tools for rail loading of lumber and pipe.  The new C11 strapping tensioner pulls the banding tight using a lithium battery powered tool!  Now you don’t need to drag a pneumatic air line to do your banding in the rail cars. The trip hazard is gone with battery power too.  At first sight the strapping tool looks sweet, but we worried about strength.  Using the C11 after a pneumolash strapping tool left the first band loose. I am a believer in battery powered banding tools after seeing this Milwaukee powered unit.

Most of us stopped worrying about switching to poly when the auto’s didn’t force it on us. But if you were one of the procrastinators who put off switching to polyester, you’re coming up on an important decision.

There’s also another thing you may need to consider, will we be ready when our customers force us into polyester strapping?

The Basics of Strap Conversions

A steel strap to poly strap line change lets you get into compliance now.  If you change your Signode PN2-114 over to a Fromm P330 you will be rewarded quickly.  Unlike steel strapping, poly strapping does not require seals or clips.  Friction weld tools rub the strapping together to make a seal free weld!

But that isn’t the only reason to switch strapping.  On top of being faster, with no clips…  Poly strapping is much safer, easier to use, and more cost effective!  Vendors like Allstrap in Columbus, OH are helping companies explore plastic strapping.  Make sure to get a site evaluation, and demo multiple strapping brands.

The strongest poly strapping is 1 1/4″ x .050″ and has rail road approval AAR82.  It is now used in the metals industry, OD/ID bands, blanks, rebar, extruded wire, and building materials.  It is seriously strong strapping!

We try to counterbalance the battery, and the poly tools are easy to use.